Sash Lock Door Handles

If you're looking to increase the security of your home without sacrificing aesthetics choose sash lock door handles. They can be used with a mortice latch or sash lock and can be used in conjunction with a night latch to add security for doors that are internal.

These handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can also be combined with tubular latches.

Lever Lock Handles

There are many different types of lever door handles to match the decor of your home. Rustic lever locks are popular in both farmhouse-style and modern homes. Classic lever handles are round or spherical and easy to hold. They are affordable, simple and fit in with any home design. Select polished or satin nickel chrome handles to create a sophisticated style. These finishes are robust and easy to clean. Other options include antique bronze as well as polished brass. Some handles have designs, such as amber worm-eyes or long-horned Cyrstals. Some levers have a pin, star or any other design molded into the bottom.

To replace your lever lock door handles first make sure you have the correct screwdriver or a tool to remove them. Based on the design and model you may need to make use of an awl or nail to remove the lever handle. Some lever handles have a narrow notch or hole on one side of the base that can be used to pry it open.

Once you have the right tool, follow the manufacturer's instructions to remove the handles you have already installed. Make sure the spindle is in place on the new lever. Doors from the past could have been morticed to accommodate previous latches and locks which require a specific spindle. Most lever handle manufacturers have the same standard door spindle size for handles.

If you are replacing the handle of a sash window restoration lock the old handle should be removed and the tubular latch bolt, that is located within the door, needs to be disconnected from the strike plate inside the door frame. You will then need to drill a hole into the door frame, then insert the latch bolt through and connect it to the strike plate within the door frame.

When installing a new lever door handle it is crucial to remember that all ADA (Americans with Disabilities Act) compliant handles are designed to be operated by hand and do not require users to tightly grip or turn their wrists. In order to comply with ADA standards for compliance the lever door handle can't be operated with fingers and thumbs or even the entire hand.

sash style double glazed windows Lock Handles

The primary function of double glazed timber sash windows lock door handles is to pull the sashes moving together to form a seal. This stops drafts from entering the room and helps to maintain interior home temperatures, saving energy bills throughout the year. They are also great for doors that don't need the security of a keyed locking system.

Sash locks are also known as mortice sashlocks. They incorporate a dead bolt and latch into a case that is fitted in the material of the door. They are often used in conjunction with door handles and are available with a wide range of options.

Lever lock handle operates with a lever on a backplate cut out below, which allows the key to be inserted to operate the mortice wooden sash window lock. This lock is most commonly used on doors that do not lock, like those found in dining rooms and living rooms. However, it can also be utilized with a tubular lock to create a more secure door.

These are designed to hold the sash in place at various points, and have a hook that fits inside the keeper. They come in different styles and designs that are suitable for various window types like sliding or hinged casement windows. Some are made of cast aluminium, whereas others are made from brass, and even wrought iron. They're available in a range of finishes to match other elements of your door furniture for instance, escutcheons that guard the keyhole.

The 3 lever sash locks are only suitable for internal doors. They do not provide the security required by insurance companies. They also have lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.

A door box sash window with five levers is the best option for external doors. It offers higher levels resistance to forced entry, and is more difficult to bypass or pick. The locks are a revolutionary design that has been tested and certified to meet the strict building regulations, fire and disability.

To replace the handle of a sash lock, remove the old fastener from both ends by removing the screws. Be sure to have a screwdriver available and carefully separate the pieces so that you don't damage them. Mark the screw holes using pencil to place the new fastener in the correct position when you are ready to put it in place it. Get rid of any dust or paint flecks, and then screw in the new fastener. Test the handle to ensure it functions properly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is an internal latch that can be operated by turning the handle. It is designed to close the door however, it doesn't lock the door like mortice locks would. They are typically used on internal doors where there is no requirement for locking. They can be equipped with knob handles or levers.

Tubular latches are available in different sizes. The sizes range from the basic to the expensive architectural. The size you pick depends on the use of the door and if you require the function of a lock. For instance bathrooms may require an open and thumbturn mechanism in the event of an emergency, so you will need locks that are lockable.

The backset of your door will also determine the latch you select. This is the distance between the edge of your door and the centre of the hole for the door handle rose/knob, and you must select a latch with an identical backset measurement. This will ensure your handle/door knobs can operate the latch without a hitch.

If you are installing an unsprung or sprung lever or door knob it is crucial to select a heavy duty tubular latch that has an oversized sprung follower and tongue. This will provide an effortless action for the latch, and keep it from becoming sluggish or ineffective with frequent use.

After you have chosen the correct latch to meet your needs the next step is to fit it onto the door. First, ensure that the latch is level with the top of the door frame/casing by taking measurements and marking the position of the latch plate then drilling holes for it. Using a countersink drill bit will help to create the right recess to sit comfortably in.

Once the latch is set after which you can attach it to the door. It is essential to verify that it's functioning correctly prior to fitting the door handles and installing the locks, so make sure to test it by opening and closing the door several times. If it's not working correctly try lubricating your door with WD40. Then try it again. If you continue to experience problems, it may be necessary to speak with an expert locksmith or installer.

Keyhole Handles

Keyhole handles work with a tubular lock installed inside the door. The latch is used to open and close the door. The handle is able to engage the latch when pushed down, and releases it when pulled up. The handles are typically used on interior doors, such as those in dining and living rooms. However they can also be fitted to the front door, if they are paired with the nightlatch.

Door knobs are more modern handles that incorporate a sprung lever/handle with a square or round fixing stem and a matching thumb-turn or escutcheon. They come in a variety of styles and finishes to match the doors of your home. They can be used with Euro cylinder locks or multipoint locking systems to provide additional security to the door. This is accomplished by putting several points of locking along the door height and requires door handles that are compatible with the right lock centre dimensions to accommodate the barrel of the cylinder.

Keyhole escutcheons cover the existing keyhole in the door to conceal it and give the handle a stylish appearance. They are available as either a screw-on or pop-on design, and in a variety styles to match your door handle. A recessed escutcheon, which is fitted to the edge of the door to hide the keyhole more and give it a modern look, is also utilized.

Some of the handles are compatible with Euro-cylinder locks. These are used for uPVC door and require compatible handles with a Euro cylinder hole and screw holes in the backplate. These handles also require a Euro cylinder escutcheon or a standard escutcheon, based on the use.

It's important to know the distinctions between a sash or mortice lock and a tubular lock, and the compatibility requirements for each. You'll need to take into account the door's thickness, the door hinges, the frame reinforcements, the size of the backplate for the handle, the lock's central dimensions, and the screw centres on the cylinder.